Medium Front End Wheel Loader Multifunctional Laser Cutting Machine For Bumper Cab Steel Plate Cut
1.General Description
TOUGH WORLD. TOUGH EQUIPMENT.
You don’t need to be told it’s a tough world. It’s your reality, you live it every day and you know how hard it can be on your people and your machines. It’s getting tougher to make your business pay too, with rising costs, increasing legislation and greater competition. We understand and we’ve put that insight into action with a choice of two, new middle weight wheel loaders: the MCL630G 652G 655G 656G and 668G. Our aim is to give you powerful, adaptable machines to bring real, multi-tasking benefits to the jobsite.
2.Specification
| Model | MCL 656G |
| Performance | rated load | 5000kg |
| Operating weight | 16700kg |
| rated bucket capacity | 2.7-4.5 m³ |
| maximum tractive force | 172KN |
| maximum breakout force | ≥163KN |
| maximum grade ability | 30° |
| maximum dump height | 3200mm |
| maximum dump reach | 1260mm |
| overall dimension (L×W×H) | 8247×3060×3410mm |
| minimum turning radius | (Bucket lateral) 5917mm |
| (Tire lateral) 6931mm |
| Engine | Model | Weichai Steyr WD10G210E22 |
| Engine type | lnline water cooling dry cylinder injection |
| No. of cylinder | 6 |
| bore x stroke | 126×130mm |
| rated power | 162kw |
| Speed/min | 2400r/min |
| maximum torque | 920N.m |
| min fuel-consume ratio | ≤215g/kw.h |
| Transmission system | torque converter | YJ375 |
| gearbox mode | power shift normally engaged straight gear |
| gear shift | 4 forward shift 4reverse shift |
| maximum speed | 41km/h |
| Drive axles | main reducing spiral | bevel gear grade 1 reduction |
| decelerating mode | planetary reduction, grade I |
| wheel base | 3300mm |
| wheel tread | 1800mm |
| minimum ground clearance | 450mm |
| Front and rear axle | 4WD,front fiexed ,rear swing |
| Steering systerm | type | coaxial |
| turning angle | 38°(left and right) |
| Hydraulic system | system working pressure | 19Mpa |
| boom lifting time | 5.95±0.2s |
| total time | 10.95±0.5s |
| operation handle | pilot |
| function of leveling automatically | yes |
| Brake system | service brake | air over hydraulic disc brake on 4 wheels |
| parking brake | manual parking brake |
| Tyre | tyre specification | 23.5-25 |
| front tyre pressure | 0.4Mpa |
| rear tyre pressure | 0.35Mpa |
| Oil Tank | fuel tank capacity | 270L |
| hydraulic oil capacity | 140L |
3. Details and Advantages
The cab protects the operator from noise and vibrations and is well ventilated. It has advanced climate control to handle the changing seasons and is completely sealed to prevent dust from entering the workplace.
HARD WORK – NO SWEAT
Whatever the job, an advanced climate control system with eight all-round vents, creates the perfect working environment in any weather. Easy-to-replace air filters further enhance the operator’s experience eliminating dust and preventing particles from polluting the cab.
CONTROL IN THE OPERATOR’S HANDS
We believe in making life easy for the operator which is why we’ve positioned the kick-down and forward/reverse buttons on the joystick.
The kick-down function gives the operator finger-tip control enabling him to lower the gear, increase engine torque and maximize bucket breakout force with the minimum of effort.
4.Production lines:
A complete production process mainly includes: material procurement-steel plate cutting-welding-spray painting -drying-assembly-inspection
Steel plate cutting:
The cutting of the steel plate is closely related to the drawing design, workers' technique and cutting equipment.
Normally there are three types of cutting machines, you can see from the pictures here.
Flame cutting is used for iron plates over 40mm thick.
While plasma cutting is for steel plate that in between 20-40mm.
Laser cutting is for steel plate between 8-20mm.
It is great for cutting that requires high precision. For example, cutting steel components for bumper, hood, and driver's cab. The advantages of laser cutting are: low temperature, so the plate is not likely deformed; the disadvantage is that it consumes a lot of power.
When the steel sheet is uneven or the cutting speed is not steady, a melting point or break-point will form; so during the cutting process, workers need to go back and forth to check.
Product Tags:
|
|
Multifunctional 5 Ton Front End Loader 3200mm Dump Height For Industrial Images
|
